Difference between revisions of "Translations:LeMaker Guitar:LCD/55/zh-hans"

From BananaPro/Pi
Jump to: navigation, search
(Created page with "<source lang="bash"> lcd0: lcd0@b02a0000 { pinctrl-names = "default"; pinctrl-0 = <&lvds_state_default>; lcd_power_gpios = <&gpio 36 0>; GPIOB4: lcd_reset_gpios...")
 
(No difference)

Latest revision as of 17:53, 15 June 2016

Message definition (LeMaker Guitar:LCD)
<source lang="bash">
lcd0: lcd0@b02a0000 {
pinctrl-names = "default";
pinctrl-0 = <&lvds_state_default>;
lcd_power_gpios = <&gpio 36 0>;    /*GPIOB4*/
lcd_reset_gpios = <&gpio 49 0>;    /*GPIOB17*/
port_type = "lvds";
data_width = <0>;     /* 0:24bit ,1:18bit */
videomode-0 = <&lcd_mode0>;
vsync_inversion = <0>;
hsync_inversion = <0>;
dclk_inversion = <0>;
lde_inversion = <0>;
lvds_ctl = <0x000a9523>;     /* last two bit: 3:8bit ,1:6bit */
lvds_alg_ctl0 = <0xc141a030>;
lightness = <128>;
saturation = <7>;
contrast = <5>;
lcd_mode0:mode@1024x600p60 {
refresh = <60>;              /* refresh frequency*/
xres = <1024>;              /* width */
yres = <600>;                /* height*/
/*in pico second, 0.000 000 000 001s*/
pixclock = <20000>;
left_margin = <56>;
right_margin = <60>;
upper_margin = <13>;
lower_margin = <18>;
hsync_len = <4>;
vsync_len = <4>;
/*0: FB_VMODE_NONINTERLACED, 1:FB_VMODE_INTERLACED*/
vmode = <0>;
};
};
Translation<source lang="bash">
lcd0: lcd0@b02a0000 {
pinctrl-names = "default";
pinctrl-0 = <&lvds_state_default>;
lcd_power_gpios = <&gpio 36 0>;    /*GPIOB4*/
lcd_reset_gpios = <&gpio 49 0>;    /*GPIOB17*/
port_type = "lvds";
data_width = <0>;     /* 0:24bit ,1:18bit */
videomode-0 = <&lcd_mode0>;
vsync_inversion = <0>;
hsync_inversion = <0>;
dclk_inversion = <0>;
lde_inversion = <0>;
lvds_ctl = <0x000a9523>;     /* last two bit: 3:8bit ,1:6bit */
lvds_alg_ctl0 = <0xc141a030>;
lightness = <128>;
saturation = <7>;
contrast = <5>;
lcd_mode0:mode@1024x600p60 {
refresh = <60>;              /* refresh frequency*/
xres = <1024>;              /* width */
yres = <600>;                /* height*/
/*in pico second, 0.000 000 000 001s*/
pixclock = <20000>;
left_margin = <56>;
right_margin = <60>;
upper_margin = <13>;
lower_margin = <18>;
hsync_len = <4>;
vsync_len = <4>;
/*0: FB_VMODE_NONINTERLACED, 1:FB_VMODE_INTERLACED*/
vmode = <0>;
};
};
lcd0: lcd0@b02a0000 {
		pinctrl-names = "default";
		pinctrl-0 = <&lvds_state_default>;
		lcd_power_gpios = <&gpio 36 0>;     /*GPIOB4*/
		lcd_reset_gpios = <&gpio 49 0>;     /*GPIOB17*/
		port_type = "lvds";
		data_width = <0>;		    /* 0:24bit ,1:18bit */
		videomode-0 = <&lcd_mode0>;
		vsync_inversion = <0>;
		hsync_inversion = <0>;
		dclk_inversion = <0>;
		lde_inversion = <0>;
		lvds_ctl = <0x000a9523>;	     /* last two bit: 3:8bit ,1:6bit */
		lvds_alg_ctl0 = <0xc141a030>;
		lightness = <128>;
		saturation = <7>;
		contrast = <5>;
		lcd_mode0:mode@1024x600p60 {
			refresh = <60>;              /* refresh frequency*/
			xres = <1024>;               /* width */
			yres = <600>;                /* height*/
			/*in pico second, 0.000 000 000 001s*/
			pixclock = <20000>;
			left_margin = <56>;
			right_margin = <60>;
			upper_margin = <13>;
			lower_margin = <18>;
			hsync_len = <4>;
			vsync_len = <4>;
			/*0: FB_VMODE_NONINTERLACED, 1:FB_VMODE_INTERLACED*/
			vmode = <0>;
		};
	};