Difference between revisions of "Translations:LeMaker Guitar:LCD/27/zh-hans"

From BananaPro/Pi
Jump to: navigation, search
(Created page with "'''第2步''': 配置10.1寸LCD分辨率('''1280 * 800)<br /> 编辑kernel dts文件: ''linux-actions-bsp/linux-actions/arch/arm/boot/dts/lemaker_guitar_bbb.dts'',设置refr...")
 
 
Line 1: Line 1:
 
'''第2步''': 配置10.1寸LCD分辨率('''1280 * 800)<br />
 
'''第2步''': 配置10.1寸LCD分辨率('''1280 * 800)<br />
 
编辑kernel dts文件: ''linux-actions-bsp/linux-actions/arch/arm/boot/dts/lemaker_guitar_bbb.dts'',设置refresh = <60>, xres = <1280>, yres = <800>。
 
编辑kernel dts文件: ''linux-actions-bsp/linux-actions/arch/arm/boot/dts/lemaker_guitar_bbb.dts'',设置refresh = <60>, xres = <1280>, yres = <800>。
<source lang="bash">
 
lcd0: lcd0@b02a0000 {
 
pinctrl-names = "default";
 
pinctrl-0 = <&lvds_state_default>;
 
lcd_power_gpios = <&gpio 36 0>;    /*GPIOB4*/
 
//lcd_reset_gpios = <&gpio 49 0>; /*GPIOB17*/
 
port_type = "lvds";
 
data_width = <0>; /* 0:24bit ,1:18bit */
 
videomode-0 = <&lcd_mode0>;
 
vsync_inversion = <0>;
 
hsync_inversion = <0>;
 

Latest revision as of 17:57, 15 June 2016

Message definition (LeMaker Guitar:LCD)
'''Step 2''': Configure 10.1 inch LCD resolution('''1280 * 800)<br />
Edit the kernel dts file: ''linux-actions-bsp/linux-actions/arch/arm/boot/dts/lemaker_guitar_bbb.dts''. set refresh = <60>, xres = <1280>, yres = <800>.
Translation'''第2步''': 配置10.1寸LCD分辨率('''1280 * 800)<br />
编辑kernel dts文件: ''linux-actions-bsp/linux-actions/arch/arm/boot/dts/lemaker_guitar_bbb.dts'',设置refresh = <60>, xres = <1280>, yres = <800>。

第2步: 配置10.1寸LCD分辨率(1280 * 800)
编辑kernel dts文件: linux-actions-bsp/linux-actions/arch/arm/boot/dts/lemaker_guitar_bbb.dts,设置refresh = <60>, xres = <1280>, yres = <800>。