All translations

Jump to: navigation, search

Enter a message name below to show all available translations.

Message

Found 2 translations.

NameCurrent message text
 h English (en)<source lang="bash">
lcd0: lcd0@b02a0000 {
pinctrl-names = "default";
pinctrl-0 = <&lvds_state_default>;
lcd_power_gpios = <&gpio 36 0>;    /*GPIOB4*/
lcd_reset_gpios = <&gpio 49 0>;    /*GPIOB17*/
port_type = "lvds";
data_width = <0>;     /* 0:24bit ,1:18bit */
videomode-0 = <&lcd_mode0>;
vsync_inversion = <0>;
hsync_inversion = <0>;
dclk_inversion = <0>;
lde_inversion = <0>;
lvds_ctl = <0x000a9523>;     /* last two bit: 3:8bit ,1:6bit */
lvds_alg_ctl0 = <0xc141a030>;
lightness = <128>;
saturation = <7>;
contrast = <5>;
lcd_mode0:mode@1024x600p60 {
refresh = <60>;              /* refresh frequency*/
xres = <1024>;              /* width */
yres = <600>;                /* height*/
/*in pico second, 0.000 000 000 001s*/
pixclock = <20000>;
left_margin = <56>;
right_margin = <60>;
upper_margin = <13>;
lower_margin = <18>;
hsync_len = <4>;
vsync_len = <4>;
/*0: FB_VMODE_NONINTERLACED, 1:FB_VMODE_INTERLACED*/
vmode = <0>;
};
};
 h 中文(简体)‎ (zh-hans)<source lang="bash">
lcd0: lcd0@b02a0000 {
pinctrl-names = "default";
pinctrl-0 = <&lvds_state_default>;
lcd_power_gpios = <&gpio 36 0>;    /*GPIOB4*/
lcd_reset_gpios = <&gpio 49 0>;    /*GPIOB17*/
port_type = "lvds";
data_width = <0>;     /* 0:24bit ,1:18bit */
videomode-0 = <&lcd_mode0>;
vsync_inversion = <0>;
hsync_inversion = <0>;
dclk_inversion = <0>;
lde_inversion = <0>;
lvds_ctl = <0x000a9523>;     /* last two bit: 3:8bit ,1:6bit */
lvds_alg_ctl0 = <0xc141a030>;
lightness = <128>;
saturation = <7>;
contrast = <5>;
lcd_mode0:mode@1024x600p60 {
refresh = <60>;              /* refresh frequency*/
xres = <1024>;              /* width */
yres = <600>;                /* height*/
/*in pico second, 0.000 000 000 001s*/
pixclock = <20000>;
left_margin = <56>;
right_margin = <60>;
upper_margin = <13>;
lower_margin = <18>;
hsync_len = <4>;
vsync_len = <4>;
/*0: FB_VMODE_NONINTERLACED, 1:FB_VMODE_INTERLACED*/
vmode = <0>;
};
};