LeMaker Banana Pro/Pi
It's an open-source single-board computer (SBC). It can run Android 4.2, Android 4.4*, Ubuntu, Debian, Fedora, Raspbian, ArchLinux, openSUSE, OpenWrt, Bananian, and other Linux OS systems such as Gentoo and Fedora. It uses the AllWinner A20 SoC, and has 1GB DDR3 SDRAM, with wired Gigabit ethernet (RJ45 socket) and a SATA port.
Banana Pi Layout
|Banana Pi Hardware Specific Sheet|
|CPU||Allwinner A20* (ARM Cortex-A7 dual-core 2 x 1.0GHz）|
|GPU||ARM Mali400MP2 - complies with OpenGL ES 2.0/1.1)|
|System Memory (SDRAM)||1GB DDR3 (shared with GPU)|
|Onboard Storage||SD/MMC card slot max. 64GB; up to 2TB on a SATA disk|
|Onboard Network||10/100/1000 Ethernet RJ45 (optional USB WiFi Dongle)|
|Video Output||HDMI, Composite (AV video), extendable with the on-board LVDS connector|
|Audio I/O||HDMI, 3.5mm stereo jack output, on-board microphone input|
|USB||2 x USB 2.0 ports, 1 x OTG micro-USB port, 1 x micro-USB for power supply|
|Expansion||Extendable 26-pin GPIO (General Purpose Input/Output) headers, camera connector, display connector for LVDS and a touch screen|
|Misc||3 x on-board buttons(Power Switch, Reset, U-boot key); IR receiver|
|Dimensions||92mm x 60 mm|
Due to the limited power output from a computer's USB port, we suggest only powering the B-Pi with a good quality 5V/2A PSU.
The Banana Pi Pro is the same as the Banana Pi besides an on-board WiFi 802.11b/g/n adapter using the AP6181 chip. Thus it does not require a USB WiFi adapter and frees up a USB port. It also adds a 3.5mm jack for integrated composite video and audio.