BananaPro/Pi:Hardware specification

From BananaPro/Pi
Jump to: navigation, search
Translate this page; This page has changes since it was last marked for translation.

Other languages:
English • ‎中文(简体)‎

Banana Pro

Banana Pro layout

Banana Pi Layout Front

Banana Pro hardware specifications

Banana Pro Hardware Specific Sheet
Item Description
CPU Allwinner A20* (ARM Cortex-A7 dual-core 2 x 1.0GHz)
GPU ARM Mali400MP2 - complies with OpenGL ES 2.0/1.1)
System Memory (SDRAM) 1GB DDR3 (shared with GPU)
Onboard Storage MicroSD card slot max. 64GB; up to 4TB on a SATA disk
Onboard Network 10/100/1000 Ethernet RJ45, on-board wifi module
Video Output HDMI, 3.5mm stereo Four-wire headphone jack(Composite audio and video interface)output, extendable with the on-board LVDS connector
Audio I/O HDMI, 3.5mm stereo Four-wire headphone jack(Composite audio and video interface) output, on-board microphone input
USB 2 x USB 2.0 ports, 1 x OTG micro-USB port, 1 x micro-USB for power supply
Expansion Extendable 40-pin GPIO (General Purpose Input/Output) headers, camera connector, display connector for LVDS and a touch screen
Misc 3 x on-board buttons(Power Switch, Reset, U-boot key); IR receiver
Dimensions 92mm x 60 mm
Weight 45g


Banana Pi

Banana Pi layout

Banana Pi Layout Front
Banana Pi Layout Back

Banana Pi hardware specifications

Banana Pi Hardware Specific Sheet
Item Description
CPU Allwinner A20* (ARM Cortex-A7 dual-core 2 x 1.0GHz)
GPU ARM Mali400MP2 - complies with OpenGL ES 2.0/1.1)
System Memory (SDRAM) 1GB DDR3 (shared with GPU)
Onboard Storage SD/MMC card slot max. 64GB; up to 4TB on a SATA disk
Onboard Network 10/100/1000 Ethernet RJ45 (optional USB WiFi Dongle)
Video Output HDMI, Composite (AV video), extendable with the on-board LVDS connector
Audio I/O HDMI, 3.5mm stereo Three-wire headphone jack output, on-board microphone input
USB 2 x USB 2.0 ports, 1 x OTG micro-USB port, 1 x micro-USB for power supply
Expansion Extendable 26-pin GPIO (General Purpose Input/Output) headers, camera connector, display connector for LVDS and a touch screen
Misc 3 x on-board buttons(Power Switch, Reset, U-boot key); IR receiver
Dimensions 92mm x 60 mm
Weight 48g

Due to the limited power output from a computer's USB port, we suggest only powering the B-Pi with a good quality 5V/2A PSU. The Banana Pro is the same as the Banana Pi besides an on-board WiFi 802.11b/g/n adapter using the AP6181 chip. Thus it does not require a USB WiFi adapter and frees up a USB port. It also adds a 3.5mm jack for integrated composite video and audio.


References